parts catalog

CASE GP-TRANSMISSION 4645018 - Caterpillar

4645018 CASE GP-TRANSMISSION Caterpillar parts CASE
Alternative (cross code) number:
Caterpillar 4645018 CASE GP-TRANSMISSION

Buy CASE GP-TRANSMISSION 4645018 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 7
  For full view, you need register


Table 1
Diagnostic Codes Table    
CDL Code     Conditions which Generate this Code     System Response     Procedure    
Personality Module : Erratic, Intermittent, or Incorrect     The flash file is for a different engine family or for a different engine application.     The engine will not start. Clearing this diagnostic code requires factory passwords. The personality module code must be reset to zero.     Program the correct flash file.    Flash Programming - A method of programming or updating the flash file in an engine Electronic Control Module (ECM).Cat® Electronic Technician (ET) is used to flash program a file into the memory of the engine ECM.Note: Customer versions of Cat ET do not have the capability for flash programming. Contact your Caterpillar Dealer for assistance.If you do not have the flash file, use the "Flash File Search" tool on the Service Technician Workbench (STW) to obtain the flash file for your engine. Alternatively, use the "Service Software Files" feature on SIS Web to obtain the flash file for your engine. You must have the engine serial number in order to search for the flash file. After locating the correct flash file, download the flash file to your PC. Write down the name of the flash file for future reference.Installing a Flash File
Establish communication between Cat ET and the engine ECM.
Select "WinFlash" from the "Utilities" menu on Cat ET.Note: If "WinFlash" will not communicate with the ECM, refer to Troubleshooting, "Electronic Service Tool Does Not Communicate".
Program the flash file into the ECM.
Select the engine ECM under the "Detected ECMs".
Press the "Browse" button in order to select the name of the flash file that will be programmed into the ECM.
When the correct flash file is selected, press the "Open" button.
Verify that the "File Values" match the application. If the "File Values" do not match the application, obtain the correct flash file.
When the correct flash file is selected, press the "Begin Flash" button.
Cat ET will indicate when flash programming has been successfully completed.
Start the engine and check for proper operation. Troubleshoot any active diagnostic or event codes. Perform any necessary repairs."WinFlash" Error Messages
If you receive any error messages during flash programming, click on the "Cancel" button in order to stop the process. Access the information about the "ECM Summary" under the "Information" menu. Ensure that you are programming the ECM with the correct file for your engine.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
OEMTPG145 OEM Transmission BN300001-UP
TH514D Telehandler MWG00001-UP (MACHINE) POWERED BY C3.4B, C4.4 Engine
TL1255D Telehandler ML700001-UP (MACHINE) POWERED BY C4.4 Engine
TL1055D Telehandler ML500001-UP (MACHINE) POWERED BY C4.4 Engine
TL943D Telehandler MLD00001-UP (MACHINE) POWERED BY C4.4 & C3.4 B Engine
TL642D Telehandler ML800001-UP (MACHINE) POWERED BY C4.4 & C3.4 B Engine
TH514D Telehandler MWG00001-UP (MACHINE) POWERED BY C3.4B, C4.4 Engine

Parts case Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.