parts catalog

CHAIN, RC-100 1C4180 - Caterpillar

1C4180 CHAIN, RC-100 Caterpillar parts CHAIN
Alternative (cross code) number:
Caterpillar 1C4180 CHAIN, RC-100
Weight: 27 pounds 12 kg.

Buy CHAIN, RC-100 1C4180 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


At operating temperature, the engine coolant is hot and under pressure. Steam can cause personal injury. Check the coolant level only after the engine has been stopped, and the cap is cool enough to touch with your bare hand. Remove the fill cap slowly to relieve pressure. Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
1. Release the pressure in the cooling system by slowly loosening the filler cap on the radiator.2. Open lift side engine panel. 3. Remove two bolts (1) and the washers.4. Remove hose assembly (2) and flange (3). 5. Remove gasket (5) and water temperature regulator (4). Install in the reverse order.
If the water temperature regulator is installed wrong, it will cause the engine to overheat. Make sure the vent hole is open and do not use liquid gasket material for a gasket. The cylinder head can be damaged if the vent hole is not open or if the gasket is installed wrong. If the gasket is damaged, use new parts for replacement.
Fill the cooling system to the correct level with coolant. Refer to the Operation & Maintenance Manual the correct level.

Parts chain Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.