AVSPARE.COM
parts catalog

CLAMP 1C4256 - Caterpillar



1C4256 CLAMP Caterpillar parts CLAMP
Rating:
81
Alternative (cross code) number:
CA1C4256
1C-4256
1C4256
Caterpillar 1C4256 CLAMP
Weight: 0.86 pounds 0 kg.

Buy CLAMP 1C4256 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Move the machine forward or backward until the segment to be removed is in position as shown.2. Remove nuts (1) and the bolts, and remove sprocket segment (1) from the final drive. The following steps are for installation of the sprocket segments.3. Make sure the surfaces of the sprocket segment and final drive that make contact are clean and free of paint.4. Put clean SAE 30W oil on the threads of the bolts.5. Put sprocket segment (2) in position on the final drive, and install the bolts with the head of the bolts against the final drive. Install nuts (1). Tighten the nuts to a torque of 175 40 N m (130 30 lb ft). Tighten the nuts 1/3 turn more. The final torque must be a minimum of 380 N m (280 lb ft).


Parts clamp Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.