parts catalog

CLIP 0005401 - Caterpillar

0005401 CLIP Caterpillar parts CLIP
Alternative (cross code) number:
Caterpillar 0005401 CLIP
Weight: 0.49 pounds 0 kg.

Buy CLIP 0005401 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Electronic Control Module (ECM) - Replace
Before the ECM is replaced, ensure that replacement is absolutely necessary. The ECM is seldom the cause of a diagnostic code. Always check that power is available to the ECM. Battery voltage is required between contacts J1-1 and J1-2 of the machine harness connector for the ECM. Continue ONLY if all other attempts to isolate the problem have failed. Always consult your dealership's Technical Communicator for possible consultation with Caterpillar. This consultation may greatly reduce the time that is required for a repair.
Turn the disconnect switch and the key start switch to the OFF position. Disconnect the machine harness from the ECM.
Remove the ECM.
Make sure that the replacement ECM is the correct part number.
Connect the machine harness to the ECM.
Install the replacement ECM.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.