AVSPARE.COM
parts catalog

CLIP 6213662 - Caterpillar


6213662 CLIP Caterpillar parts FB221
Rating:
55
Alternative (cross code) number:
CA6213662
621-3662
6213662
Caterpillar 6213662 CLIP

Buy CLIP 6213662 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK FELLER BUNCHER,

Compatible equipment models: 6213662:

TRACK FELLER BUNCHER  FB221   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:


Table 3
Temperature Setpoints
Switch Switch Setting Description
Main temperature setting 6 82.2 °C (180.0 °F)
Auxiliary temperature setting N/A
Temperature Driven Auto-Purge N/A(1)
(1) This feature is not set at the factory.Note: A control box that is a replacement will have these settings. Note the settings of the DIP switches prior to removing a controller or replacing a controller. Set the switches on the replacement to the same designation.Setup of the ECM Controlled System
The following procedures are only valid for systems that are controlled by the ECM on Track-Type Tractors. The setup of the ECM controlled system is performed with Electronic Technician (ET).
Table 4
Parameter Settings for the Flexxaire Fan on the ECM
Parameter Description Default Range
Variable Pitch Fan Enable or Disable the entire Flexxaire Fan Disable Disable or Enable
Manual Purge Enable or Disable the manual purge switch Enable Disable or Enable
Engine Fan Suspend Purge Suspend purges in the forward gears Disabled Disable or Enable
Fan Speed Solenoid Activate the solenoid for a demand fan D6R N/A N/A
D6R II N/A N/A
D6R III N/A N/A
D6T N/A N/A
D7R N/A N/A
D8R OFF ON or OFF
D9R ON ON or OFF
D10R OFF ON or OFF
Purge Cycle Interval Set the time interval between purges 20 minutes 5 - 120 minutes
Purge Cycle Duration Set the duration for an individual purge 15 seconds 5 - 30 seconds
Fan Blade Cooling Position Set the normal direction of the air flow PUSH PUSH or PULL The parameter for the variable pitch fan controls the operation of the entire Flexxaire Fan. Select “Enable” or “Disable ”. When “Disable” is selected, the blades will not go into pitch. The blades will remain in NEUTRAL.The parameter for the manual purge switch controls the operation of the manual purge switch that is located on the dash. Select “Enable” or “Disable ”. When “Disable” is selected, the button will not start a purge cycle.The parameter to suspend purges, controls the automatic purge function. If the parameter is enabled, purges will not occur when the machine is in a forward gear. Purge suspend is useful when the tractor is working with wooden chips or the machine is used in landfill applications. If the fan goes through a purge cycle in a forward gear, debris that falls over the top of the blade may be drawn into the front of the radiator. Purge suspend delays the automatic purge until the tractor is in REVERSE in order to avoid plugging the radiator. “Enable” allows purges only when the machine is in REVERSE. “Disable” allows purges in FORWARD or REVERSE.The parameter for the fan speed solenoid controls the operation of the standard demand fan. Select “OFF” for operation of the Flexxaire Fan.The parameter for the purge cycle interval controls the time between purges. A shorter time between purges causes more wear on the components. Set the time at the maximum amount of time that will keep the radiator clean.The parameter for the purge cycle duration controls the length of the purge. Set the time to allow the radiator and the engine enclosures to be cleaned of

Caterpillar parts catalog:

Caterpillar parts catalog
FB221 FELLER BUNCHER 8XD00001-UP (MACHINE) POWERED BY 3208 ENGINE


Parts clip Caterpillar catalog:

9S2014 CLIP
120G, 120H, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 135H NA, 140G, 140H ES, 140H NA, 143H, 14H NA, 160H ES, 160H NA, 163H NA, 16H NA, 235, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3406...
1A5350 CLIP
120G, 12E, 12G, 130G, 140B, 140G, 14G, 1673C, 225, 3176B, 3176C, 3196, 3204, 3208, 3304, 3306, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 416B, 416C, 416D, 420D, 424B, 424B HD, 424D, 426B, 426C, 428...
4H8878 CLIP
130G, 16, 1673, 1673B, 1674, 1693, 215, 215B, 225, 235, 235C, 3176B, 3176C, 3196, 3208, 322C, 322C FM, 325C, 325C FM, 3306, 330C FM, 330C L, 330C MH, 3406, 3408, 3412, 3508, 3512, 3516, 3612, 3616, 51...
9L7631 CLIP-SPRING
1140, 1145, 1150, 1160, 225, 225D, 3145, 3160, 3208, 613B, 613C, CB-614, CS-551, FB221, PR-1000, PS-500
9L9251 CLIP
1140, 1160, 140, 225, 3160, 3208, 3306C, 613B, 613C, C13, C18, C27, C32, C9.3, CX31-C13I, CX31-C18I, FB221, PR-1000, PS-500
9N2061 CLIP
225, 225D, 303.5C, 303.5D, 303C CR, 304D CR, 3208, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 550B, 560B, 564, 574B, 950K, 962K, 966K, 972K, 980K, 980K HLG, C13, C15, C27, C32, C7, CS-551, D6R, D6R II, D...
9N6629 CLIP
225, 3208, 770G, 770G OEM, 772G, 772G OEM, FB221, PR-1000, PS-500, XQC1600
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.