4416477 CONSOLE GP-INSTRUMENT Caterpillar parts
C7.1
Rating:
Alternative (cross code) number:
CA4416477
441-6477
4416477
CA4416477
441-6477
4416477
GENERATOR SET,
Compatible equipment models: 4416477:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g01333674
Remove bolts (1).
Illustration 2 g01333690
Disconnect hose assemblies (2), (3), and (5). Remove brake foot control valve (4). Installation procedure
Note: Inspect all of the components. Replace the components that are worn or damaged.
Illustration 3 g01333690
Install the brake foot control valve (4) for the foot brake. Connect hose assemblies (2), (3), and (5).
Illustration 4 g01333674
Install bolts (1).
Start By:
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g01333674
Remove bolts (1).
Illustration 2 g01333690
Disconnect hose assemblies (2), (3), and (5). Remove brake foot control valve (4). Installation procedure
Note: Inspect all of the components. Replace the components that are worn or damaged.
Illustration 3 g01333690
Install the brake foot control valve (4) for the foot brake. Connect hose assemblies (2), (3), and (5).
Illustration 4 g01333674
Install bolts (1).