AVSPARE.COM
parts catalog

CONTROL AR-HYDRAULIC 3535046 - Caterpillar



3535046 CONTROL AR-HYDRAULIC Caterpillar parts 140M 2, 160M 2 CONTROL
Rating:
33
Alternative (cross code) number:
CA3535046
353-5046
3535046
Caterpillar 3535046 CONTROL AR-HYDRAULIC

Buy CONTROL AR-HYDRAULIC 3535046 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 3535046:

MOTOR GRADER  140M 2   160M 2   Caterpillar
  For full view, you need register

Information:

2. Disconnect linkage (1) from the governor.3. Loosen two bolts (2). 4. Remove bolts (3). 5. Remove four bolts (5) and remove governor (4) from the fuel injection pump housing. 6. Remove ferrule (6) from the fuel injection pump housing. 7. Remove O-ring seal (7) from the governor housing.Install Governor
1. Install O-ring seal (1) on the governor housing and ferrule (2) on the fuel injection pump housing. 2. Put the governor in position on the fuel injection pump housing with the fuel rack lever engaged in the fuel rack.3. Remove the plug and install rod (3) from tooling (A). Push the rod in until the speed limiter plunger will permit full movement of the governor. Tighten the plug to hold the rod in position.
TYPICAL EXAMPLE4. Remove the plug from the cover on the side of the fuel injection pump housing and install tooling (A).5. Move the governor control lever while the rack stop collar is pulled up. Do this several times and watch the dial indicator to see if the indicator moves backward and forward. If the dial indicator does not give this indication, the fuel tank lever is not engaged in the rack. Remove the governor and check the position of the fuel rack lever and install the governor again.6. Install the bolts that hold the governor to the fuel injection pump housing.7. Remove tooling (A). 8. Install the bolts in bracket (4). 9. Tighten two bolts (5) in the bracket.10. Connect linkage (6) to the governor.11. Install the brace over the governor.end by:a) install fuel ratio control

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts control Caterpillar catalog:

8Y7480 CONTROL GP-STEERING & TMSN
416C, 426C, 428C, 436C, 438C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.