CONTROL GP-EXH 3599026 - Caterpillar

Image1.1.1
Image1.1.2
Group Number 3
This rework procedure can be performed before or after failure.
1. Before performing this rework procedure, the turbocharger serial number data tags must be inspected. Reference Image1.1.1 to identify the location of the serial number data tag.
2. Inspect the turbocharger serial number data tag (Image.1.1.1) to determine if the part number of the turbocharger is 130-9725 for the C15/3406E.
- If the turbocharger part number IS 130-9725 for the C15/3406E, proceed to Step 3.
- If the turbocharger part number IS NOT 130-9725 C15/3406E, this program does not apply. No further action is required.
3. From the turbocharger serial number data tags, determine the date codes of the turbochargers. The date code must match one of those listed in Image2.1.1 in order to qualify for this program.
- If the turbocharger serial number date code matches one of those listed in Image2.1.1 continue to Step 4.
- If the date code is not listed in Imgage2.1.1, this program does not apply. No further action is required.
4. Inspect the turbocharger for failure or damage.
- If turbocharger has not failed the heat shroud, only the cartridge is to be replaced.
- If the turbocharger has failed the heat shroud but has not damaged the turbine or compressor housing, only the cartridge is to be replaced.
- If the turbocharger has failed the heat shroud and has damaged the turbine or compressor housing, the complete turbocharger is to be replaced under this program.
Refer to Disassembly and Assembly instructions RENR9715 for the 3406E / C15.
Image2.1.1