AVSPARE.COM
parts catalog

CONTROL GP 3599508 - Caterpillar



3599508 CONTROL GP Caterpillar parts CONTROL
Rating:
76
Alternative (cross code) number:
CA3599508
359-9508
3599508
Caterpillar 3599508 CONTROL GP
Weight: 2 pounds 1 kg.

Buy CONTROL GP 3599508 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove the planetary section from the marine gear.2. Remove the companion flange and the retainer cover from the rear of the planetary section.3. Set the planetary section on blocks with the planetary gear carrier upward. The planetary section now weighs approximately 1700 lb. (771,1 kg).
PUSHING CARRIER SHAFT OUT OF TAPER ROLLER BEARINGSTools required: 1H3107 Push Puller, two 1H3108 Legs, four 3H468 Plates, 5F7366 Screw, two 3H466 Nuts, 5F7353 Washer, 7F9540 Puller, 9S5800 Hydraulic Pump, FT866 Back-up Plate, three FT867 Rods and two 1B4209 Nuts.4. Use tools required to force the carrier shaft from the bearings (use a hoist to support the tool setup). Push on the output shaft inner bearing race and remove the shaft.5. Push the forward bearing outer race and spacer from the planetary housing, if necessary, by using forcing screws.
FORCING SCREWS INSTALLED TO REMOVE OUTER RACE


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.