AVSPARE.COM
parts catalog

CONVERSION KIT 2333078 - Caterpillar



2333078 CONVERSION KIT Caterpillar parts CONVERSION
Rating:
51
Alternative (cross code) number:
CA2333078
233-3078
2333078
Caterpillar 2333078 CONVERSION KIT
Weight: 64 pounds 29 kg.

Buy CONVERSION KIT 2333078 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Note: Cleanliness is an important factor. Before the installation procedure, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble.
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the oil that is being sealed.
Illustration 1 g00507752
Position manifold (1). Connect hose assembly (4) to manifold (1).
Connect wire harness (3) to the filter bypass switch. Install two nuts (2) and the washers. Tighten two nuts (2) to a torque of 3.7 .3 N m (32.75 2.66 lb in).
Repeat Steps 3 and 4 for the remaining manifold.
Refill the hydraulic tank with hydraulic oil to the correct level. Refer to Operation and Maintenance Manual, SEBU7173, "Hoist, Torque Converter and Brake Tank Oil - Change" for the correct procedure. End By:
Remove the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.