CORE AS-CONDENSER 3966886 - Caterpillar

3966886 CORE AS-CONDENSER Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3966886
396-6886
3966886

Weight: 6 pounds 3 kg.

Buy CORE AS-CONDENSER 3966886 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 7 request: Show. This information for suppliers only!

#1068002 3966886 2023-02-28

#941796 396-6886 2022-08-03

#941752 3966886 2022-08-03

#903047 3966886 2022-06-11

#876961 396-6886 2022-05-05

#876597 3966886 2022-05-05

#457962 3966886 2020-05-04

Number on catalog scheme: 1

Caterpillar 3966886 Parts scheme CORE AS-CONDENSER

For full view, you need register

Information:

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01133777
Disconnect harness assembly (3) .
Remove bolts (1) and support (2) .
Illustration 2 g01133754
Disconnect hose assemblies (5) from piston motor (4) .
Illustration 3 g01133762
Remove hose clamp (6). Move hose assemblies (5) out of the way.
Illustration 4 g01133763
Remove bolts (8) and cover (7) .
Illustration 5 g01133764
Remove bolts (8) and plate (9) .
Illustration 6 g01133802
Disconnect all necessary harness assemblies (10). Remove the locknut and cables (11) .
Replace the covers for protection.
Illustration 7 g01133806
Remove ground cable (12) .
Illustration 8 g01133807
Remove bolts (14) and cover (13) .
Illustration 9 g01133842
Illustration 10 g01133844
Attach a suitable lifting device on hydraulic generator (15). The weight of hydraulic generator (15) and piston motor (4) is approximately 155 kg (341 lb).
Remove bolts (16) and hydraulic generator (15) .