AVSPARE.COM
parts catalog

COUPLER 2332949 - Caterpillar



2332949 COUPLER Caterpillar parts COUPLER
Rating:
21
Alternative (cross code) number:
CA2332949
233-2949
2332949
Caterpillar 2332949 COUPLER

Buy COUPLER 2332949 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Note: Cleanliness is an important factor. Before the installation procedure, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble.
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00498405
Use three bolts (17) and the washers in order to install cylinder assembly (2) to the frame assembly.
Repeat Step 3 for the remaining cylinder assembly.
Illustration 2 g00498404
Install tee fitting (14) onto cylinder assembly (2). Install check valve (15) into tee fitting (14).
Connect hose assembly (13) and (16) to check valve (15).
Install hose assembly (12) into tee fitting (14).
Install elbow (11) onto cylinder assembly (1).
Illustration 3 g00498403
Connect hose assembly (10) to cylinder assembly (1).
Illustration 4 g00498377
Connect wire harness (7) to limit switch (9). Tighten two screws (8) to a torque of 13.4 1.5 N m (118.6 13.28 lb in).
Illustration 5 g00498376
Reposition boot (6).
Repeat Step 10 and Step 11 for the remaining cylinder assembly.
Illustration 6 g00498371
Connect hose assembly (5) to cylinder assembly (2).
Repeat Step 13 for the remaining cylinder assembly.
Illustration 7 g00498368
Illustration 8 g00498363
Connect hose assembly (3) to cylinder assembly (2). Connect hose assembly (4) to the cylinder assembly (1).
Fill the hydraulic tank with hydraulic oil to the correct level. Refer to Operation and Maintenance Manual, SEBU7173, "Hoist, Torque Converter and Brake Tank Oil - Change" for the correct procedure.
Charge the air pressure in the air tank. Refer to Operation and Maintenance Manual, SEBU7173, "Starting with an External Air Supply" for the correct procedure.
Personal injury or death can result from air in the oil for the brake hydraulic system.Air in the system can prevent complete brake application and it is possible that the wheels on the machine can not be stopped.Air must not be in the oil for the brake hydraulic system to function properly.
Purge the air from the hydraulic oil in the brake hydraulic system. Refer to Systems Operation/Testing And Adjusting, SENR1494, "Brake System Air - Purge" for the correct procedure. End By:
Disconnect the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.