AVSPARE.COM
parts catalog

COVER 0005630 - Caterpillar



0005630 COVER Caterpillar parts COVER
Rating:
26
Alternative (cross code) number:
CA0005630
000-5630
0005630
Caterpillar 0005630 COVER
Weight: 1 pounds 0 kg.

Buy COVER 0005630 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 36 g00827753
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Use a suitable press and Tooling (D) in order to remove ring assembly (71) .
Illustration 37 g01049842
Remove spring retainer (76) from actuator (69). Remove springs (74), (73), and (72). Remove spring retainer (75) .
Illustration 38 g00827771
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Rotate actuator (69) to the other side. Use Tooling (C) and a suitable press in order to remove retaining ring (77) .
Illustration 39 g01049844
Remove O-ring seal (85) and ring assembly (84). Remove spring retainer (82). Remove springs (81), (80), and (78). Remove spring retainer (83) and rod (79) .
Illustration 40 g00826892
Remove seal (86) from the pump housing.
Remove liner (87) from the pump housing.
Illustration 41 g00826915
Remove bearing races (88) from the pump housing.Note: Bearing races (88) have a ridge on one side of the bearing. The ridge faces the OUTSIDE of the pump. Damage will occur if the bearing races are installed incorrectly.
Illustration 42 g00826929
Use Tooling (B) to remove retaining ring (89) .
Illustration 43 g00826943
Use Tooling (E) to remove seal (90) .Note: Seal (90) will be destroyed by removal.
Illustration 44 g00826959
Use Tooling (B) to remove retaining ring (91) from the pump housing.
Illustration 45 g00826966
Remove pump shaft (92) from pump housing (49). Note: Remove the pump shaft in the proper direction.
Illustration 46 g00826999
Use Tooling (F) to remove retaining ring (93) from the pump shaft (92) .
Illustration 47 g01051632
Install pump shaft (92) in a suitable press. Use Tooling (G) to remove bearing (94) and washer (94A) from pump shaft (92) .


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.