AVSPARE.COM
parts catalog

COVER AS 2277865 - Caterpillar



2277865 COVER AS Caterpillar parts COVER
Rating:
61
Alternative (cross code) number:
CA2277865
227-7865
2277865
Caterpillar 2277865 COVER AS

Buy COVER AS 2277865 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


1. HIGH2. LOW3. MEDIUMThe alarm is set at the highest sound level (1) when the machine leaves the factory.Fan Switch-Heater and Air Conditioner
The fan switch has three positions clockwise (High, Medium and Low) for the heater, and three positions counterclockwise for the air conditioner.Circuit Breakers
Push the button in to reset the circuit breaker. If working properly, the button will remain depressed. If the button does not stay in, or comes out shortly after being reset, have the appropriate electrical circuit checked.
Main (1.) - 80A
Brake Retraction (2.) - 20A
Air Conditioner (3.) - 15A
Dome, Stop, Turn and Tail (4.) - 15A
Engine Start (5.) - 10A
Ladder Lamp (6.) - 10A
Engine Shutdown (7.) - 10A
Headlamp Low Beam (8.) - 15A
Headlamp High Beam (9.) - 15A 10. SpareFuses
Always replace fuses with ones of the correct ampere rating.
Fuses protect the circuit from damage caused by overloads. Change a fuse if the element is separated. If the element of a new fuse separates, have the circuit checked.
Electronic Monitoring System (EMS) (1.) - 10A
Gauges and Instruments (2.) - 10A
Back-Up Alarm (3.) - 10A
Transmission Control (4.) - 10A
Air Dryer (5.) - 10A
Cigar Lighter (6.) - 10A
Traction Aid (7.) - 10A
Automatic Lubrication (If Equipped) (8.) - 10A
24 to 12 Volt Converter (If Equipped) (9.) - 10AHeating and Air Conditioning System Operation
The heating and air conditioning system can perform four functions.Heating
Turn the cooling control (1) counterclockwise to OFF. Turn the fan switch (2) counterclockwise to High, Medium or Low. Turn the heating control switch (3) clockwise for the desired temperature.Cooling
Turn the heating control (3) counterclockwise to OFF. Turn the fan switch (2) clockwise to High, Medium or Low. Turn the cooling control switch (1) clockwise for the desired temperature.Pressurizing
Air pressure inside the cab will help keep dust out, when heating or cooling is not desired.Turn the heating (3) and cooling controls (1) counterclockwise to OFF. Turn the fan switch (2) clockwise to High, Medium or Low, to obtain enough air pressure to keep dust out of the cab.Defogging
To prevent moisture from forming on the windshield and windows, the heating system, along with the air conditioning system, can be used to remove moisture from the air in the cab.Move the fan switch (2) clockwise to either High, Medium or Low. Turn the heating (3) and cooling controls (1) clockwise until the moisture level is lowered and the temperature is comfortable.Seat Adjustment
1. Raise the backrest up and move it to the desired position. Lower it to lock it into position. 2. Push down on seat height lever (1), to release the lock. Move the seat down, or allow it to raise, to the desired height. Release the lever to lock the seat. 3. Pull up fore-aft lever (2). Slide the seat forward or back to the desired position. Release the lever to lock the seat.4. Pull up seat angle lever (3). Adjust the seat cushion to the desired angle. Release the lever to lock the seat bottom.5. Turn knob (4) clockwise to increase or counterclockwise to decrease the stiffness of suspension.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.