AVSPARE.COM
parts catalog

COVER 7B0292 - Caterpillar



7B0292 COVER Caterpillar parts COVER
Rating:
86
Alternative (cross code) number:
CA7B0292
7B-0292
7B0292
Caterpillar 7B0292 COVER
Weight: 2 pounds 1 kg.

Buy COVER 7B0292 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Fastening The Seat Belt
Illustration 2 g01211788Pull seat belt (4) out of the retractors in a continuous motion.Fasten seat belt catch (3) into buckle (2). Make sure that the seat belt is placed low across the lap and over the center of the shoulder of the operator.The retractors will adjust the length of the seat belt. The lap belt retractor will lock in position. The shoulder belt retractor will remain free until certain conditions cause the shoulder belt retractor to lock. The buckle and retractor assemblies will allow the operator to have some unrestricted movement for comfort.Releasing The Seat Belt
Illustration 3 g01211795Grasp the seat belt near the latch.Push the release button on the buckle in order to release the seat belt.Guide the seat belt into the automatic retractors.Seat Belt Adjustment for Retractable Seat Belts
At the time of installation, the retractable seat belt and the instructions for installation of the retractable seat belt meet the SAE J386 standards.Fastening The Seat Belt
Illustration 4 g01211801Pull seat belt (7) out of the retractor in a continuous motion.Fasten seat belt catch (6) into buckle (5). Make sure that the seat belt is placed low across the lap of the operator.The retractor will adjust the length of the seat belt and the retractor will lock in position. The buckle and retractor assemblies will allow the operator to have some unrestricted movement for comfort.Releasing The Seat Belt
Illustration 5 g01211804Grasp the seat belt near the latch.Push the release button on the buckle in order to release the seat belt.Guide the seat belt into the automatic retractor.Seat Belt Adjustment for non-retractable seat belts
At the time of installation, the non-retractable seat belt and the instructions for installation of the non-retractable seat belt meet the SAE J386 standards.Note: Adjust both ends of the seat belt. The seat belt should be snug but comfortable.Lengthening the Seat Belt
Illustration 6 g01211809
Unfasten the seat belt.
Illustration 7 g01211811
To remove the slack in outer loop (8), rotate buckle (9). This will free the lock bar. This permits the seat belt to move through the buckle.
Remove the slack from the outer belt loop by pulling on the buckle.
Loosen the other half of the seat belt in the same manner. If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt. Shortening the Seat Belt
Illustration 8 g01211812
Fasten the seat belt. Pull out on the outer belt loop in order to tighten the seat belt.
Adjust the other half of the seat belt in the same manner.
If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt. Fastening The Seat Belt
Illustration 9 g01211815Fasten seat belt catch (10) into buckle (9). Make sure that the seat belt is placed low across the lap of the operator.Releasing The Seat Belt
Illustration 10 g01211817Pull up on the release lever. This will release the seat belt.Extension of the Seat Belt
When using retractable seat belts, do not use seat belt extensions, or personal injury or death can result.The retractor system may or may not lock up depending on the length


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.