COVER GP-CONSOLE 9V9369 - Caterpillar

Customer password
This parameter allows the customer to lock out certain parameters by entering a password. Customer passwords must be used to unlock any parameters that are protected by customer passwords before the parameter can be changed. Factory passwords are required if this password is lost.Customer Passwords
First Password ____________________
Second Password ____________________Power Rating (hp at rpm) ____________________Rating Selection (A-E) ____________________PTO Governor Parameters
PTO Engine Speed Ramp Rate____________________rpm/secEngine Parameters
Top Engine Limit (TEL) at 100 percent load (If Applicable) ____________________
Torque Limit ____________________
High Idle (If Applicable) ____________________
Low Idle ____________________
Intermediate Speed ____________________Engine Monitoring Mode
"OFF" ____________________
"Warning" ____________________
"Warning/Derate" ____________________
"Warning/Derate/Shutdown" ____________________
"Coolant Level Sensor Enable/Disable" ____________________
"Fuel Pressure Sensor Enable/Disable" ____________________
"Inlet Manifold Air Temperature Sensor Enable/Disable" ____________________Equipment IDMaintenance Indicator
Manual-Hours
Auto-Hours
Manual-Fuel
Auto-FuelAuxiliary Pressure
High Warning Set Point ____________________Auxiliary Temperature
High Warning Set Point ____________________The customer specified parameters can be changed as often as needed. Password protection is provided so that the customer can change the parameters. The customer can authorize someone else to change the parameters. Ensure that a record of the parameters is kept in the Operation and Maintenance Manual. For detailed instructions on programming the engine for optimum performance and for optimum fuel economy, consult your Caterpillar dealer.