parts catalog

CUP 1C3969 - Caterpillar

1C3969 CUP Caterpillar parts PR-105 CUP
Alternative (cross code) number:
Caterpillar 1C3969 CUP
Weight: 2 pounds 0 kg.

Buy CUP 1C3969 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 1C3969:

COLD PLANER  PR-105   Caterpillar
Number on catalog scheme: 3
  For full view, you need register


Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well ventilated area and, if in an enclosed area, vent the exhaust to the outside.
Mounting the Machine
* Mount the machine only where steps and/or handholds are provided.* Inspect, and when necessary, clean and have repairs made to steps and handholds before mounting. * Face the machine when mounting.* Maintain a three-point contact (two feet and one hand or one foot and two hands contact) with the steps and handholds.Machine Walk-Around Inspection
Remove frame lockpin and store in unlocked position as shown. The frame lockpin must be in the unlocked position to articulate the machine. Remove the wheel lean bolt from the locked position.
Do not operate the machine with the wheel lean bolt in the locked position. Machine damage may occur.
For maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for loose bolts, trash buildup, oil or coolant leaks, broken or worn parts. Inspect the condition of the equipment and the hydraulic components.Check all of the oil, coolant and fuel levels.Refer to the Every 10 Service Hours or Daily in the Maintenance Section for more detailed information.Refer to Walk-Around Inspection in the Maintenance Section for detailed walk-around inspection information.Seat and Seat Belt Checks
Adjust the seat at the beginning of each shift or when changing operators.Adjust the seat to allow full travel of the pedals when the operator is seated against the seat back.Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Fasten the seat belt before starting the engine.

Caterpillar parts catalog:

Caterpillar parts catalog

Parts cup Caterpillar catalog:

0780664 CUP
CP-433B, CS-431B, CS-551
0665463 CUP-FILTER
CB-434, CS-323, CS-431B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.