AVSPARE.COM
parts catalog

CYLINDER BLK 0005624 - Caterpillar



0005624 CYLINDER BLK Caterpillar parts CYLINDER
Rating:
16
Alternative (cross code) number:
CA0005624
000-5624
0005624
Caterpillar 0005624 CYLINDER BLK

Buy CYLINDER BLK 0005624 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. The precision components of the pump or of the motor can be damaged by contaminants or by dirt. All disassembly procedures must be performed on a clean work surface. Clean all the interior components in clean solvent. Dry all the interior components with compressed air. Keep cleaned parts covered and protected at all times.Note: Step 1 refers to the disassembly of the left side parking brake.
Illustration 1 g00812957
Remove harness assembly (2) from parking brake (1). Note: Step 2 refers to the disassembly of the right side parking brake.
Illustration 2 g00812981
Remove elbow (4) from parking brake (3). Note: Perform Step 3 through Step 12 for both the right side parking brake and the left side parking brake.
Illustration 3 g00813064
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use a suitable press in order to hold the brake together. Remove bolts (5).
Illustration 4 g00813070Note: Take note of the orientation of the hydraulic ports in housing (6) and of the drain holes in housing (7).
Slowly release the press in order to separate housing (6) from housing (7).
Illustration 5 g00813752
Remove gasket (8) and plates (9) from housing (7).
Illustration 6 g00813753
Remove retaining ring (10).
Illustration 7 g00813754Note: The shaft is not symmetrical. Note the orientation of the discs and of the plates.
Remove discs (11) and plates (12).
Illustration 8 g00813756
Remove pins (13), shaft (14), and plate (15).
Illustration 9 g00813803
Remove springs (16).
Illustration 10 g00813805
Remove retainer (17) from housing (7).
Illustration 11 g00813810
Remove piston (18) from housing (6).
Illustration 12 g00813815
Illustration 13 g00838674
Remove O-ring seal (20), backup ring (19), O-ring seal (22), and backup ring (21) from piston (18). Take note of the orientation of the backup rings and of the O-ring seals for installation purposes.


Parts cylinder Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.