AVSPARE.COM
parts catalog

CYLINDER 1C4286 - Caterpillar



1C4286 CYLINDER Caterpillar parts CYLINDER
Rating:
16
Alternative (cross code) number:
CA1C4286
1C-4286
1C4286
Caterpillar 1C4286 CYLINDER
Weight: 29 pounds 13 kg.

Buy CYLINDER 1C4286 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

2. Disconnect wires (1) from the solenoid.3. Disconnect wires (2) from the starter motor.4. Remove bolts (4), starter motor (3) and the gasket from the flywheel housing. Use two persons to remove the starter motor. The weight of the electric starting motor is 23 kg (50 lb). The following steps are for the installation of the electric starting motor.5. Install the gasket and starter motor (3) in position on the flywheel housing and install bolts (4).6. Connect wires to the starter motor and tighten to a torque of 27 to 33 N m (20 to 25 lb ft).7. Connect wires (1) to the solenoid and tighten to a torque of 3.5 to 4.5 N m (31 to 40 lb in).8. Connect the battery cables to the batteries.End By:a. install engine guards


Parts cylinder Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.