AVSPARE.COM
parts catalog

CYLINDER GP-HYDRAULIC 2278174 - Caterpillar



2278174 CYLINDER GP-HYDRAULIC Caterpillar parts SW345B, SW60 CYLINDER
Rating:
16
Alternative (cross code) number:
CA2278174
227-8174
2278174
Caterpillar 2278174 CYLINDER GP-HYDRAULIC
Weight: 18 pounds 8 kg.

Buy CYLINDER GP-HYDRAULIC 2278174 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SAW,

Compatible equipment models: 2278174:

WHEEL SAW  SW345B   SW60   Caterpillar
Number on catalog scheme: 2
 
  For full view, you need register

Information:

12 Volt Starting Motor
Illustration 1 g00295928
Starting Motor (Side View)
Illustration 2 g00295930
End view of the starting motor which shows the electrical connections
No load conditions at 25 °C (77 °F) Rpm of shaft ... 7000 minimumCurrent draw ... 130 amperes maximumVoltage ... 11.5 voltsRated voltage ... 12 volts (1) Tighten the battery terminal nut to the following torque: ... 24 to 32 N m (18 to 24 lb ft) (2) Tighten the nut for the switch terminal to the following torque: ... 1.0 to 1.3 N m (9 to 12 lb in)Tension of the spring for the motor brush ... 8.34 to 11.00 N (1.9 to 2.5 lb)Minimum resistance of the starter cable at 200 °C (392 °F) and at 12 volts ... 0.0017 ohmsStart Relays
9G-4368 Relay
Illustration 3 g00731492Voltage ... 12 VDCResistance between "W1" terminal and "W2" terminal ... 15 1.5 ohms069-5466 Relay
Illustration 4 g00295932Voltage ... 6 VDCResistance between terminal "A" and terminal "B" ... 30 to 34 ohms24 Volt Starting Motor
No load conditions at 25 °C (77 °F) Rpm of shaft ... 7000 minimumCurrent draw ... 85 amperes maximumVoltage ... 23 voltsRated voltage ... 24 voltsMinimum pull-in voltage ... 18 voltsBrush length: Minimum brush length ... 15.5 mm (0.61 inch)Armature end play ... 0.1 to 0.3 mm (0.004 to 0.012 inch)Install shims or remove shims in order to adjust the armature end play to the correct specification.Commutator New diameter ... 45 mm (1.77 inch)Minimum diameter ... 42.5 mm (1.67 inch)

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
SW45 & SW60 Wheel Saws WLS00001-UP (MACHINE)
SW345B, SW360B & SW460B Wheel Saws HFS00001-UP (MACHINE)


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.