AVSPARE.COM
parts catalog

CYLINDER & LINES GP-BOOM 2278208 - Caterpillar



2278208 CYLINDER & LINES GP-BOOM Caterpillar parts 312C CYLINDER
Rating:
53
Alternative (cross code) number:
CA2278208
227-8208
2278208
Caterpillar 2278208 CYLINDER & LINES GP-BOOM

Buy CYLINDER & LINES GP-BOOM 2278208 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2278208:

EXCAVATOR  312C   Caterpillar
Number on catalog scheme: 8
 
  For full view, you need register

Information:

Sound Level Information
The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when "ANSI/SAE J1166 FEB 2008" is used to measure the value for an enclosed cab. The measurement is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. The sound level may vary during diesel particulate filter regeneration.Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.The average exterior sound pressure level is 73dB(A) when the "SAE J88FEB 2006- Constant Speed Moving Test" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate ground speed”. The sound level may vary during diesel particulate filter regeneration. The exterior sound pressure level is 71 dB(A) when the "SAE J88FEB 2006- Maximum Governed Speed Test" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine is stationary with engine speed set to maximum high idle speed”. The sound level may vary during diesel particulate filter regeneration. Sound Level Information for Machines in European Union Countries and in Countries that Adopt the "EU Directives"
Note: The information below applies only to machines that have the CE mark on the PIN plate.The dynamic operator sound pressure level is 75 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The sound level may vary during diesel particulate filter regeneration. The measurement was conducted with the cab doors and the cab windows closed. The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 102 dBA."The European Union Physical Agents (Vibration) Directive 2002/44/EC"
Vibration Data for Compact Wheel Loaders
Information Concerning Hand/Arm Vibration Level
When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 m/s2.Information Concerning Whole Body Vibration Level
This section provides vibration data and a method for estimating the vibration level for compact wheel loaders.Note: Vibration levels are influenced by many different parameters. Many items are listed below.
Operator training, behavior, mode and stress
Job site organization, preparation, environment, weather and material
Machine type, quality of the seat, quality of the suspension system, attachments and condition of the equipmentIt is not possible to get precise vibration levels for this machine. The expected vibration levels can be estimated with the information in Table 1 in order to calculate the daily vibration exposure. A simple evaluation of the machine application can be used.Estimate the vibration levels for the three vibration directions.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Engine
312C & 312C L Excavators BWH00001-UP (MACHINE) POWERED BY 3064 Engine


Parts cylinder Caterpillar catalog:

1522884 CYLINDER BLOCK GP
3054, 3054B, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 914G, AP-800C, BG-225B, BG-225C, CB-434C, CB-534C, CB-535B, CP-433C, CP-433E, CS-32...
1709803 CYLINDER & SEAL GP-BUCKET
311C, 312C, 312C L, 314C, 320C, 322C, 323D L, 325C, 325D, 330C, 330C L
1394666 CYLINDER HEAD GP
3054, 312C, 554, CB-534C, CB-535B, CP-433C, CP-433E, CS-431C, CS-433C, PF-290B, PS-200B, PS-360B, TH103, TH62, TH63, TH82, TH83
1709800 CYLINDER & LINES GP-BLADE
311C, 312C, 312C L, 314C, 315C
1709804 CYLINDER & SEAL GP-BLADE
311C, 312C, 312C L, 314C, 315C
1847660 CYLINDER
311D LRR, 312B L, 312C, 312D, 312E, 314D LCR, 314E LCR, 315B L, 315C, 315D L, 316E L, 317B LN, 318E L
2098227 CYLINDER BLOCK GP-SHORT
3054, 312C, 430D, 436C, 438C, 908, CP-433E, M315, PF-290B, PS-200B, PS-300B, PS-360B, TH350B, TH355B, TH460B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.