CYLINDER GP-LIFT 3967809 - Caterpillar

Illustration 1 g02709559
Typical view of guards installed
Table 1
Required Parts List for 773F Machines    
Item     Qty     Part Number     Description    
1     1     358-9325     Guard As    
2     5     2J-3349     Block    
3     21     5P-2228     Bolt    
4     21     8T-4223     Hard Washer    
5     1     359-8990     Guard As    
6     4     4V-3899     Strip    The parts that are listed in Table 1 are part of 360-8032 Rock Guard Gp.
Table 2
Required Parts List for 775F Machines    
Item     Qty     Part Number     Description    
1     1     359-4905     Guard As    
2     5     2J-3349     Block    
3     21     5P-2228     Bolt    
4     21     8T-4223     Hard Washer    
5     1     359-8990     Guard As    
6     4     4V-3899     Strip    The parts that are listed in Table 2 are part of 360-8033 Rock Guard Gp.
Illustration 2 g02717097
(A) 26 mm (1.0 inch) (B) 109 mm (4.3 inch) (C) 96 mm (3.8 inch) (D) 109 mm (4.3 inch) (E) 26 mm (1.0 inch) (F) 18 mm (0.7 inch) (H) 30 mm (1.2 inch) (J) 96 mm (3.8 inch) (L) 30 mm (1.2 inch) (M) 18 mm (0.7 inch) (N) 366 mm (14.4 inch) (P) 20 mm (0.8 inch)Fabricate a plate (7) to the dimensions that are shown in Illustration 2. Drill 9 mm (0.4 inch) holes (K) in six places as shown in Illustration 2. Tap the drilled holes (K) with 1/2-13 inch tap.
Illustration 3 g02717218
(Q) 1325 2 mm (52.2 0.1 inch) (R) 1067 2 mm (42.0 0.1 inch) (S) 725 2 mm (28.5 0.1 inch) (T) 370 2 mm (14.6 0.1 inch) (U) 61 2 mm (2.4 0.1 inch) (V) 17.0 1.0 mm (0.67 0.04 inch) (W) 30 3 mm (1.2 0.1 inch) (X) 339 3 mm (13.3 0.1 inch) (Y) 156 3 mm (6.1 0.1 inch) (Z) 10.0 1.0 mm (0.39 0.04 inch) (AA) 23 2 mm (0.9 0.1 inch) (W1) 5 mm (0.2 inch) fillet weld (W2) 6 mm (0.2 inch) fillet weld (W3) 3.0 mm (0.12 inch) fillet weldWeld the fabricated plate (7), 2J-3349 Block (2) and 4V-3899 Strip (6) to the truck body. Refer to Illustration 3 for dimensions. Assemble rest of the parts.The updated guard assemblies are adaptable and effective with the machines that are listed in Table 3.Note: The parts that are listed in Table 1 for 773F machines, Table 2 for 775F machines and the fabricated plate (7) should be used only if the existing parts failed.
Table 3
Model     Adaptability     Effectivity    
773F     S/N:EED1-1350     S/N:EED1351-UP    
S/N:EXD1-143 S/N:EXD144-UP    
775F     S/N:DLS1-1500