parts catalog

DISTRIBUTION AR 3534224 - Caterpillar

3534224 DISTRIBUTION AR Caterpillar parts 993K DISTRIBUTION
Alternative (cross code) number:
Caterpillar 3534224 DISTRIBUTION AR

Buy DISTRIBUTION AR 3534224 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3534224:

WHEEL LOADER  993K   Caterpillar
  For full view, you need register


2. Disconnect shaft (1) for the circle reverse and fasten it to the frame of the machine.3. Disconnect the oil lines (2) from the front of the machine. 4. Fasten a hoist to the drawbar. 5. Disconnect the link (4) for the circle centershift and fasten it to the frame.6. Disconnect the links (3) and (5) for the blade lift. Keep all shims with the same links for correct installation. 7. Remove the bolts (6) and socket cap. Make identification of the shims for use during assembly.8. Remove the circle drawbar. Weight of the circle, blade and drawbar as a unit is 3400 lb. (1543 kg). Drawbar weight is 800 lb. (386 kg).Install Circle Drawbar
1. Fasten a hoist and position the circle drawbar on the machine.
TYPICAL EXAMPLE2. Install the cap on the ball and socket joint using the shims that were removed. Check the adjustment of the joint after the lift arms are installed. 3. Connect the links (3) for the blade lift and the link (1) for the circle centershift. Use the shims that were removed with the same link when installing.4. Connect the oil lines at the front of the machine.5. Connect the drive shaft (2) for the circle reverse.6. Check circle drawbar and socket adjustment in the following way: Lift the blade, then put a bar between the drawbar and the ball socket. Push the drawbar away from the socket, then remove the bar. Measure the clearance between the ball and cap. Use shims as needed to get a clearance no greater than .062 in. (1,57 mm).

Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.