parts catalog

DISTRIBUTION 3534254 - Caterpillar

3534254 DISTRIBUTION Caterpillar parts DISTRIBUTION
Alternative (cross code) number:
Caterpillar 3534254 DISTRIBUTION

Buy DISTRIBUTION 3534254 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


This Special Instruction covers the installation procedure for 418-1811 Chassis Wiring Gp on the models and applications listed above.Safety Section
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
418-1811 Chassis Wiring Gp Revision Level 00    
Item    Qty    Part No.    Description    
(1)     8     3S-2093     Cable Strap    
(2)     1     7K-1181     Cable Strap    
(3)     1     432-8547     Valve Harness As    
Illustration 2 g03878080
418-1811 Chassis Wiring Gp Installation Procedure
Illustration 3 g03878081
(GG-C1) Connect to Harness As-Chassis: "K858 YL", "K862 GY", K869 BU (1) 3S-2093 Cable Strap (3) 432-8547 Chassis Harness As
Connect harness (GG-C1) to Harness As-Chassis.
Secure harness (3) .
Illustration 4 g03878082
(GG-C2) Connect to Stem 3 Extended Solenoid: "K858 YL", K869 BU (GG-C3) Connect to Stem 3 Retract Solenoid: "K862 GY", K869 BU (2) 7K-1181 Cable Strap (3) 432-8547 Chassis Harness As
Connect (GG-C2) to "STEM 3 Extend Solenoid".
Connect (GG-C3) to "STEM 3 Retract Solenoid".
Secure harness (3) .

Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.