parts catalog

DISTRIBUTION AR 3966795 - Caterpillar

3966795 DISTRIBUTION AR Caterpillar parts 314D LCR
Alternative (cross code) number:
Caterpillar 3966795 DISTRIBUTION AR

Buy DISTRIBUTION AR 3966795 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3966795:

EXCAVATOR  314D LCR   Caterpillar
  For full view, you need register


Illustration 4 g01199800
After the OK key is pressed, the "LEVER / PEDAL / ATCH" screen should appear. Use the down key in order to highlight "MOD L THUMBWHEEL". Press the OK key (8) .Note: Illustration 4 shows that both the left thumb wheel and the right thumb wheel are highlighted. Only one of the options will be highlighted at a time.
Illustration 5 g01199803
After the OK key is pressed, the monitor will begin to communicate to the ECM. When the ECM is ready, the next screen will automatically appear.
Illustration 6 g01199818
Press the OK key (8) in order to start the process of calibration. After the OK key is pressed, all inputs will be disabled.
Illustration 7 g01199822
Ensure that the thumb wheel is in the neutral position. Press OK key (8) .
Illustration 8 g01199823
Move the thumb wheel to the FORWARD position. move the thumb wheel to the BACKWARD position.
Allow the inputs to return to the NEUTRAL position. Press the OK key (8) .
Illustration 9 g01199825
Press the OK key (8). Pressing the OK key enables the machine's inputs.
Illustration 10 g01199827
The process of calibrating is completed. Press the cancel key (7) in order to exit the upper level screen.
Illustration 11 g01199830
It is possible for an error to occur when you are calibrating. If an error occurs during the process of calibrating, restart the process of calibrating.
Repeat Steps 7 through Step 15 for the right thumb wheel.Calibration with Caterpillar Electronic Technician
Illustration 12 g01203270
The calibration's initial start-up displays the following: "Left Joystick Thumbwheel Calibration", "Right Joystick Thumbwheel Calibration", "Left Attachment Pedal Calibration" and "Right Attachment Pedal Calibration". Perform one calibration at a time. Follow the instructions in order to perform the calibration.
Illustration 13 g01203273
As the calibration is being performed, the active step will be displayed in bold text.
Illustration 14 g01203281
After the completion of a step, a check will appear in the completed box. Press the "NEXT" button in order to continue to the next step of calibration.
Illustration 15 g01203291
Illustration 16 g01203292
When the calibration is completed, the "CALIBRATION SUCCESSFUL" screen will be displayed.
Illustration 17 g01203295
The "CALIBRATION UNSUCCESSFUL" screen and an error code will be displayed if the calibration is unsuccessful.

Parts distribution Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.