DOOR AS-LH 9V8984 - Caterpillar

9V8984 DOOR AS-LH Caterpillar parts 950B DOOR

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9V8984
9V-8984
9V8984

Weight: 0.03 pounds 0 kg.

Buy DOOR AS-LH 9V8984 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V8984:

WHEEL LOADER 950B Caterpillar

Number on catalog scheme: 4

Caterpillar 9V8984 Parts scheme DOOR AS-LH

For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02673817
Slide the locking tab into the unlocked position. Disconnect harness assembly (2) from crankshaft position sensor harness (1).
Cut cable strap (6).
Remove bolt (3) from the cylinder block.
Carefully remove crankshaft position sensor (5) from the cylinder block. Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
Remove O-ring seal (4) (not shown) from crankshaft position sensor (5). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 506 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02673817
Install a new O-ring seal (4) (not shown) to crankshaft position sensor (5).
Install crankshaft position sensor (5) to the cylinder block.
Apply Tooling (A) onto the threads of bolt (3). Install bolt (3) and tighten the bolt to a torque of 8 N m (71 lb in).
Connect harness assembly (2) to crankshaft position sensor harness (1). Slide the locking tab into the locked position.
Install a new cable strap (6). Note: Ensure that the cable strap meets the Original Equipment Manufacturers (OEM) specification.