AVSPARE.COM
parts catalog

DRAG TUBE 1C4131 - Caterpillar



1C4131 DRAG TUBE Caterpillar parts DRAG
Rating:
86
Alternative (cross code) number:
CA1C4131
1C-4131
1C4131
Caterpillar 1C4131 DRAG TUBE
Weight: 197 pounds 89 kg.

Buy DRAG TUBE 1C4131 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

5. Remove the intake valve lifter with Tool (E) as follows: a. Install 5P-2685 Nut(3) and 5P-6601 Collet(4) on 5P-2408 Outer Handle Assembly (5).b. Install 5P-6599 Inner Handle Assembly (6) in 5P-2408 Outer Handle Assembly(5).
Typical Examplec. Install Tool (E) in the intake valve lifter. Hold the 5P-2408 Outer Handle Assemblyand tighten the 5P-6599 Inner Handle Assemblyuntil the 5P-6601 Collet is tight against the inside of the intake valve lifter.
Typical Exampled. Remove intake valve lifters (7) from the cylinder block with Tool (E). Put identification marks on the lifters as to their location in the engine.
Typical Example6. Remove the exhaust valve lifters with Tool (E) as follows: a. Install 5P-2685 Nut(3) and 5P-6601 Collet(4) on 5P-2408 Outer Handle Assembly (5). The opening in the cylinder head assembly for the intake valve lifter is larger than the opening in the exhaust valve lifter side. The tooling and each valve lifter must be installed and removed from the intake valve lifter side.b. Install the outer handle assembly in the intake valve lifter side of the cylinder head assembly. Slide


Parts drag Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.