3966867 ELBOW-EXHAUST Caterpillar parts
Rating:
Alternative (cross code) number:
CA3966867
396-6867
3966867
CA3966867
396-6867
3966867
Weight: 2 pounds 1 kg.
Number on catalog scheme:
31
For full view, you need register
Information:
Removal
Table 1
Required Tools
Tool Part Number Description Qty
A 9S-5564 Pin Puller Sleeve As 1
B 9U-5343 Puller Stud 1
C 6V-3160 Double Acting Cylinder 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 1 g01024209
Remove nuts and bolts (1), (3), and (4). Remove link (2). Use two people in order to remove link (2).
Illustration 2 g01024239
Install a chain around link assembly (5), as shown.
Illustration 3 g01024241
Remove upper pin (6). Remove any shims that may be present.
Illustration 4 g01024255
Support link (8) and remove pin (7). Use two people in order to remove pin (7). Remove any shims that may be present.
Illustration 5 g01024256
Illustration 6 g01025123
Attach a suitable lifting device to link assembly (5). Remove the chain. Remove pin assembly (9) by using Tooling (A), (B) and (C), as shown. Remove link assembly (5). Remove any shims that may be present.
Table 1
Required Tools
Tool Part Number Description Qty
A 9S-5564 Pin Puller Sleeve As 1
B 9U-5343 Puller Stud 1
C 6V-3160 Double Acting Cylinder 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 1 g01024209
Remove nuts and bolts (1), (3), and (4). Remove link (2). Use two people in order to remove link (2).
Illustration 2 g01024239
Install a chain around link assembly (5), as shown.
Illustration 3 g01024241
Remove upper pin (6). Remove any shims that may be present.
Illustration 4 g01024255
Support link (8) and remove pin (7). Use two people in order to remove pin (7). Remove any shims that may be present.
Illustration 5 g01024256
Illustration 6 g01025123
Attach a suitable lifting device to link assembly (5). Remove the chain. Remove pin assembly (9) by using Tooling (A), (B) and (C), as shown. Remove link assembly (5). Remove any shims that may be present.