parts catalog

ENGINE AR-COMPLETE 1246714 - Caterpillar

1246714 ENGINE AR-COMPLETE Caterpillar parts 3406C ENGINE
Alternative (cross code) number:
Caterpillar 1246714 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1246714 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 1246714:

TRUCK ENGINE  3406C   Caterpillar
  For full view, you need register


1. Raise right access door.2. Pull two boots (2) off to expose wiring terminals.3. Remove two nuts (4) (not shown). Mark or identify wiring for later installation.4. Remove bolt (1) from P-clamp.5. Use tool (A) to remove shutoff solenoid (3). The following steps are for the installation of the shutoff solenoid.6. Use tool (A) to install shutoff solenoid (3).
When using an offset spanner wrench, the torque must be recalculated to prevent over torquing. Use The Torque Computer Form No. SEHS7150.
7. Tighten shutoff solenoid (3) to a torque of 70 10 N m (50 7 lb ft).8. Position P-clamp to the shutoff solenoid. Secure bolt (1).9. Position wiring to the two terminals. Install two nuts (4) (not shown).10. Install two boots (2) over wiring terminals.11. Close right access door.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.