AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 1246751 - Caterpillar



1246751 ENGINE AR-COMPLETE Caterpillar parts 3406C ENGINE
Rating:
43
Alternative (cross code) number:
CA1246751
124-6751
1246751
Caterpillar 1246751 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1246751 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 1246751:

TRUCK ENGINE  3406C   Caterpillar
  For full view, you need register

Information:

(1) Torque for plug (not shown) ... 25 10 N m (18.5 7.4 lb ft)(2) Apply 9S3263 Thread Lock to the bolt threads(3) Torque for nut ... 200 40 N m (148 30 lb ft)(4) Use 4C5300 Gasket Maker as required.(5) Torque for pipe plug ... 90 N m (65 lb ft)(6) Dimension of weight shaft to bearing end play ... 1.91 .64 mm (.075 .025 in)(7) Torque for nut ... 200 15 N m (148 11 lb ft)(8) Torque bolt to ... 88 10 N m (65 7 lb ft)(9) Torque bolt to ... 88 10 N m (65 7 lb ft)(10) Dimension A ... 56.6 to 60.2 mm (2.23 to 2.37 in) A (minimum) = 55.8 mm (2.20 in) + eccentric shaft end play. A (maximum) = 60.2 mm (2.37 in)Measure "A" with eccentric shaft and coupling pushed in as far as possible.(11) Use 6V4876 Molykote Lubricant as required. (12) Torque for two plugs ... 60 10 N m (44 7 lb ft)(13) Torque for pipe plug ... 90 20 N m (65 15 lb ft)(14) Torque for pipe plugs ... 90 20 N m (65 15 lb ft) With the fill plug port almost at the 12 o'clock position and the indicator tab on the drum shell at six o'clock. Fill the drum with oil until it flows out of check plug at the seven o'clock position. [approx. 47 liter/min (12 U.S. gpm)](15) Apply 9S3263 Thread Lock to the plug threads and torque to ... 110 20 N m (80 15 lb ft)(16) Torque for bolt ... 30 7 N m (22 5 lb ft)(17) Torque for nut ... 270 40 N m (200 30 lb ft)Vibration Frequency Sensor Adjustment
Sensor adjustment must be made with the motor installed.1. Loosen the locknut and turn vibration frequency sensor (1) until contact is made with sprocket (2), and back out one turn. Dimension (A), the clearance between the sprocket and sensor, must be 1.5 mm (.06 in).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.