AVSPARE.COM
parts catalog

ENGINE AR 1247430 - Caterpillar



1247430 ENGINE AR Caterpillar parts G3408 ENGINE
Rating:
11
Alternative (cross code) number:
CA1247430
124-7430
1247430
Caterpillar 1247430 ENGINE AR

Buy ENGINE AR 1247430 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Related part:
1247430  SHORT BLOCK  10R6164  R

Compatible equipment models: 1247430:

GAS ENGINE  G3408   Caterpillar
  For full view, you need register

Information:

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the fuel from the fuel tank into a suitable container. The capacity of the fuel tank is 781 L (206 US gal). Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g00981114
Illustration 2 g00981115
Remove two hose assemblies (2) from the bottom of fuel tank (1) .
Remove hose assembly (3) .
Illustration 3 g00981116
Disconnect wires (4) from fuel tank (1) .
Remove the cable straps that connect wiring harness assembly (5) to the fuel tank.
Illustration 4 g00981117
Attach a suitable lifting device, suitable lifting slings, and Tooling (A) to fuel tank (1) .
Remove three bolts (6) and remove fuel tank (1) from the machine. The weight of the fuel tank is approximately 182 kg (401 lb).Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Brackets     3    
Illustration 5 g00981117
Attach a suitable lifting device, suitable lifting slings, and Tooling (A) to fuel tank (1) .
Install fuel tank (1) and three bolts (6). The weight of the fuel tank is approximately 182 kg (401 lb).
Illustration 6 g00981116
Connect two wires (4) .
Install the cable straps that connect wiring harness assembly (5) to fuel tank (1) .
Illustration 7 g00981115
Illustration 8 g00981114
Install hose assembly (3) to fuel tank (1) .
Install two hose assemblies (2) to the bottom of the fuel tank.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.