ENGINE AR-COMPLETE 1562298 - Caterpillar

Illustration 1 g03892004
Attach a suitable lifting device to engine (21). The weight of engine (21) is approximately 327 kg (720 lb). Install engine (21)
Illustration 2 g03892000
Illustration 3 g03891987
Install bolts (20) into the rear engine mounts. Install bolt (19) in the lower front engine mount.
Illustration 4 g03892698
Connect ground strap (18).
Illustration 5 g03891928
Connect lower coolant hose (17).
Illustration 6 g03891915
Install harness assembly (15). Install hoses (16)
Illustration 7 g03891871
. Install hose assemblies (13) and (14).
Illustration 8 g03891851
Connect harness assemblies (11) and cable assemblies (12).
Illustration 9 g03891836
Install injector harness assemblies (10). Attach all clips and harnesses.
Illustration 10 g03891829
Illustration 11 g03891828
Connect clips (7) and install the harness assembly. Install harness assemblies (8) and (9).
Illustration 12 g03891799
Illustration 13 g03891780
Install compressor (6) on the engine. Install the tube assemblies. Connect tube assemblies (4) to hose ends.Note: Compressor may be installed as engine is half way into the chassis or remove counterweight for clearance.
Install V-belt (5). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace"" for the correct Installation procedures.
Charge the air conditioner refrigerant into the air conditioner system. Refer to Service Manual, SENR5664, ""All Products Air Conditioning and Heating R-134a for All Caterpillar Machines" for the correct procedure. Refer to Special Publication, NENG2500, ""Air Conditioning Tools"" for the correct tools."
Illustration 14 g03891766
Illustration 15 g03891749
Install fuel lines with clips (3) over the rear of the engine. Install fuel lines (1) and (2) as previously marked.
Fill the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct filling procedures.End By:
Install the piston pump.
Install the diesel particulate filter.
Install the hood.