AVSPARE.COM
parts catalog

ENGINE AR-COMP 1695112 - Caterpillar



1695112 ENGINE AR-COMP Caterpillar parts ENGINE
Rating:
16
Alternative (cross code) number:
CA1695112
169-5112
1695112
Caterpillar 1695112 ENGINE AR-COMP

Buy ENGINE AR-COMP 1695112 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Specifications
Table 1
Transmission Lubrication Pressure
Configuration Specification Actual
High Idle Rpm Rear Gear Train Lube Input Transfer Gear Lube Transmission Lube
2225 RPM Before Torque Converter External With Clutch 5 Update 140 45 kPa (20 6.5 psi)
Without Clutch 5 Update 160 50 kPa (23 7 psi)
Internal With Clutch 5 Update 145 45 kPa (21 6.5 psi)
Without Clutch 5 Update 165 55 kPa (24 8 psi)
After Transmission Cooler External With Clutch 5 Update 150 45 kPa (22 6.5 psi)
Without Clutch 5 Update 170 55 kPa (25 8 psi)
Internal With Clutch 5 Update 160 48 kPa (23 7 psi)
Without Clutch 5 Update 180 50 kPa (26 7 psi)
2100 RPM Before Torque Converter External With Clutch 5 Update 125 40 kPa (18 6 psi)
Without Clutch 5 Update 140 40 kPa (20 6 psi)
Internal With Clutch 5 Update 135 40 kPa (20 6 psi)
Without Clutch 5 Update 150 45 kPa (22 6.5 psi)
After Transmission Cooler External With Clutch 5 Update 135 40 kPa (20 6 psi)
Without Clutch 5 Update 155 45 kPa (22.5 6.5 psi)
Internal With Clutch 5 Update 145 45 kPa (21 6.5 psi)
Without Clutch 5 Update 165 45 kPa (24 6.5 psi)
1950 RPM Before Torque Converter External With Clutch 5 Update 135 40 kPa (20 6 psi)
Without Clutch 5 Update 155 45 kPa (22.5 6.5 psi)
After Transmission Cooler With Clutch 5 Update 145 45 kPa (21 7 psi)
Without Clutch 5 Update 165 45 kPa (24 6.5 psi) Required Tools
Table 2
Required Tools
Item Part Number Description Qty
A 198-4240 Digital Pressure Indicator 1 Machine Preparation
Operate the machine until the transmission oil is at an operating temperature of 80°C to 90°C (176°F to 194°F).
Park the machine on a smooth, level surface.
Shift the transmission direction control switch to the NEUTRAL position.
Lower the blade to the ground. Turn the implement lockout switch to the ON position.
Press the parking brake switch to the ON position.
Turn off the engine.
Place blocks in front of the wheels and behind the wheels.
Illustration 1 g06003384
Pressure tap (1) is located on the left side of the transmission .
Install pressure gauge (A) onto pressure tap (1).Test Procedure
Start the engine.
Operate the machine with the transmission in the NEUTRAL position and the engine at high idle. Refer to Table 1 for the correct transmission lube pressure. Record the gauge reading in Table 1.
Stop the machine.
Turn off the engine.
Remove the test equipment.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.