1695191 ENGINE AR-COMPLETE Caterpillar parts C-12 ENGINE
Rating:
Alternative (cross code) number:
CA1695191
169-5191
1695191
CA1695191
169-5191
1695191
TRUCK ENGINE,
Related part:
1695191
SHORT BLOCK
0R9680
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
For full view, you need register
Compatible equipment models: 1695191:
TRUCK ENGINE C-12
Caterpillar
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Breather Tool 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01339595
Breather tool
To install the breather body, Tooling (A) must be used. The tool should be fabricated from 3.1 mm (1/8 inch) steel stock. The dimensions for the tool are given in Illustration 1. All dimensions are shown in millimeters.
Illustration 2 g01339597
Illustration 3 g03704554
Note: Illustration 3 shows the later type of crankcase breather cover that is installed in the valve mechanism cover. The later type of crankcase breather cover is not serviceable.
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Lubricate a new O-ring seal (9) with clean engine oil. Install the O-ring seal to the adapter plate (8) .
Install adapter plate (8) to valve mechanism cover (10) .
Install washers (7) and bolts (6) to adapter plate (8) . Tighten the bolts to a torque of 4.4 N m (38 lb in).
Lubricate a new O-ring seal (5) with clean engine oil. Install the O-ring seal to the bottom of breather body (4) .
Use Tooling (A) in order to screw breather body (4) into adapter plate (8) . Tighten the breather body to a torque of 8 N m (71 lb in).
Install gauze (2) into breather body (4) .
Lubricate a new O-ring seal (3) with clean engine oil. Install the O-ring seal to the top of breather body (4) .
Install cover (1) to breather body (4) .Note: Ensure that the outlet of the cover is in the correct position in order to align with hose (12) for the breather.
Illustration 4 g01339688
Install clamps (11) to hose (12) .
Connect hose (12) to cover (1) and to tube (13) . Tighten the clamps.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Breather Tool 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01339595
Breather tool
To install the breather body, Tooling (A) must be used. The tool should be fabricated from 3.1 mm (1/8 inch) steel stock. The dimensions for the tool are given in Illustration 1. All dimensions are shown in millimeters.
Illustration 2 g01339597
Illustration 3 g03704554
Note: Illustration 3 shows the later type of crankcase breather cover that is installed in the valve mechanism cover. The later type of crankcase breather cover is not serviceable.
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Lubricate a new O-ring seal (9) with clean engine oil. Install the O-ring seal to the adapter plate (8) .
Install adapter plate (8) to valve mechanism cover (10) .
Install washers (7) and bolts (6) to adapter plate (8) . Tighten the bolts to a torque of 4.4 N m (38 lb in).
Lubricate a new O-ring seal (5) with clean engine oil. Install the O-ring seal to the bottom of breather body (4) .
Use Tooling (A) in order to screw breather body (4) into adapter plate (8) . Tighten the breather body to a torque of 8 N m (71 lb in).
Install gauze (2) into breather body (4) .
Lubricate a new O-ring seal (3) with clean engine oil. Install the O-ring seal to the top of breather body (4) .
Install cover (1) to breather body (4) .Note: Ensure that the outlet of the cover is in the correct position in order to align with hose (12) for the breather.
Illustration 4 g01339688
Install clamps (11) to hose (12) .
Connect hose (12) to cover (1) and to tube (13) . Tighten the clamps.
Caterpillar SIS machinery equipment:
Caterpillar SIS
- C-12 Truck Engine 2KS00001-UP » 169-5191 ENGINE AR-COMPLETE
