ENGINE AR-COMPLETE 1695231 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 242 - Start By:
Release system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic oil from the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manualfor the correct procedure for the correct draining and filling procedures.
Illustration 1 g02907798
Disconnect hose assemblies (1) and harness assembly (2). Remove bolts (4) and piston motor (vibratory) (3). Installation Procedure
Install piston motor (vibratory) (3) in the reverse order of removal.
Apply Tooling (A) to bolts (4). Note: Apply lubricant to splines and add 10 mL (0.34 oz) of lubricant to shaft cavity.