ENGINE AR-COMPLETE 1695253 - Caterpillar

SMCS Code: 6501-086; 6502-086 Caterpillar recommends the use of 5P-0960 Molybdenum Grease for lubricating the boom, stick and bucket control linkage. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more information on Molybdenum grease.Apply lubricant through all fittings after operation under water.Wipe all fittings before you apply lubricant. 1. Apply lubricant through the fitting at the base of each boom cylinder. 2. The fittings are at the base of the boom. The fittings can be serviced from the platform on top of the storage box. To lubricate the lower boom bearings, apply lubricant through fittings (1) and (2).3. Apply lubricant through fittings (3) and (4) for the Boom cylinder rod.4. Apply lubricant through fitting (5) for the Stick cylinder head. To ensure proper lubrication of the lower boom bearings and the boom cylinder rod end bearings, lubricant should be applied through fittings (1),(2), (3) and (4). Apply lubricant first when the boom is raised and any attachment is suspended. Then apply lubricant when the boom is lowered and the attachment is rested on the ground with a slight downward pressure. 5. Apply lubricant through fittings (6). Fittings (6) is at the connection point of the boom and of the stick. 6. Apply lubricant through fitting (7) on the stick cylinder rod and fitting (8) at the bucket cylinder head end.