parts catalog

ENGINE AR-COMPLETE 1695255 - Caterpillar

1695255 ENGINE AR-COMPLETE Caterpillar parts C-12
Alternative (cross code) number:
Caterpillar 1695255 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 1695255 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 1695255:

TRUCK ENGINE  C-12   Caterpillar
  For full view, you need register


Table 1
Required Software
Serial Number Prefix Software Part Number Win Flash/ET Description Flashing Hardware
Software Common To All Machines
All 491-5536 Machine Control J1939 (Com 2 or Com 3)
All 491-5537 Transmission J1939 (Com 2 or Com 3)
All 512-0221 Cab Display Ethernet
Serial Number Specific Software
TAS 494-5907 Engine (LRC) J1939 (Com 2 or Com 3)
MB9 466-2619 Engine (HRC) J1939 (Com 2 or Com 3)
MB9 441-0634 DEF Controller J1939 (Com 2 or Com 3) Software - Install
Note: Caterpillar recommends copying engine electronic control module (ECM) configuration parameters and injector calibration serial numbers as backup, prior to flashing engine ECM with latest software.Configure Cat ET to flash displays using the Ethernet Communication Protocol.
Illustration 1 g06098937
Under "Utilities", select "Preferences".
Illustration 2 g06098945
Select "Ethernet Direct Connection".
Illustration 3 g06098947
Select "Intel® 82579LM Gigabit Network Connection".
Illustration 4 g06098954
After selections have been entered, click "OK".
Illustration 5 g06098958
Select "Winflash".
Illustration 6 g06098965
Once connected, display will look like Illustration 6.
Illustration 7 g06098974
Click in "Select a Flash File" box. Browse to select file from the computer.
Illustration 8 g06098998
Select "Begin Flash".
Illustration 9 g06099002
Wait for the process to complete.Note: The process may pause at 45 percent and again at 90 percent while flashing the software. No additional action is required.
Illustration 10 g06099005
Return to Cat ET to revert to standard Communication Adaptor hardware and continue flashing the remaining ECMs.Final Steps
Turn the machine key to OFF.
Turn the battery disconnect switch to OFF .
Wait 10 seconds.
Turn battery disconnect switch to ON.
Download a product status report (PSR) using Cat ET.
Clear any logged faults or codes on machine.
Exercise machine to verify correct function.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.