1695261 ENGINE AR-COMPLETE Caterpillar parts 3406E ENGINE
Rating:
Alternative (cross code) number:
CA1695261
169-5261
1695261
CA1695261
169-5261
1695261
TRUCK ENGINE,
Compatible equipment models: 1695261:
TRUCK ENGINE 3406E
Caterpillar
For full view, you need register
Information:
Removal Procedure
Start By:
Release system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic oil from the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manualfor the correct procedure for the correct draining and filling procedures.
Illustration 1 g02908216
Disconnect hose assemblies (1) and harness assembly (2).
Remove piston motor (3). Use two people to remove piston motor (3). The weight of piston motor (3) is approximately 36 kg (80 lb). Installation Procedure
Install piston motor (3) in the reverse order of removal.
Start By:
Release system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic oil from the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manualfor the correct procedure for the correct draining and filling procedures.
Illustration 1 g02908216
Disconnect hose assemblies (1) and harness assembly (2).
Remove piston motor (3). Use two people to remove piston motor (3). The weight of piston motor (3) is approximately 36 kg (80 lb). Installation Procedure
Install piston motor (3) in the reverse order of removal.
Caterpillar SIS machinery equipment:
Caterpillar SIS
- 3406E Truck Engine 2WS00001-UP » 169-5261 ENGINE AR-COMPLETE