parts catalog

ENGINE AR-CORE 3535084 - Caterpillar

3535084 ENGINE AR-CORE Caterpillar parts 980H ENGINE
Alternative (cross code) number:
Caterpillar 3535084 ENGINE AR-CORE

Buy ENGINE AR-CORE 3535084 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3535084:

WHEEL LOADER  980H   Caterpillar
  For full view, you need register


Illustration 1 g00660107
(1) Dual horsepower setscrew assembly
Remove the dual horsepower setscrew assembly (1). The dual horsepower setscrew assembly consists of the cover, a setscrew, a nut, and a setscrew plug.Note: If the governor is disassembled past this point, the governor may need to be reset.
Manually push in the old piston assembly in order to activate the low horsepower setting.Note: Push in the piston assembly until the piston bottoms out in order to engage the Low Horsepower setting.
Adjust the calibration bench to the "LOAD STOP ADJ" rpm that is specified in the TMI. Slowly move the throttle to the "LOW IDLE ADJ" position and back to the "THROT STOP ADJ" position. Do not move the throttle again during this checking procedure.
Check the governor output dimension. The governor output dimension should be within the "DUAL POWER STOP ADJ" dimension.
Reinstall dual horsepower setscrew assembly (1) .Note: The governor is operating correctly and the governor can be used again without any adjustment if the performance of the governor is acceptable according to the tolerance checks.Note: If the governor fails any of the High Horsepower tests, proceed to the Testing and Adjusting, "Governor (Type V) - Adjust" section in this manual.Note: If the governor fails only the Low Horsepower test, proceed to the Testing and Adjusting, "Governor (Type VII) - Adjust" section of this manual.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
980H Wheel Loader JMS00001-UP (MACHINE) POWERED BY C15 Engine
980H Wheel Loader MHG00001-UP (MACHINE) POWERED BY C-15 Engine
980H Wheel Loader KZL00001-UP (MACHINE) POWERED BY C15 Engine
980H Wheel Loader PF800001-UP (MACHINE) POWERED BY C15 Engine

Parts engine Caterpillar catalog:

CP-56, CP-64, CS-56, CS-64, CS-74
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.