AVSPARE.COM
parts catalog

ENGINE AR-COMPLETE 3599212 - Caterpillar



3599212 ENGINE AR-COMPLETE Caterpillar parts C13 ENGINE
Rating:
86
Alternative (cross code) number:
CA3599212
359-9212
3599212
Caterpillar 3599212 ENGINE AR-COMPLETE

Buy ENGINE AR-COMPLETE 3599212 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 3599212:

TRUCK ENGINE  C13   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 271 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02155365
Remove bolts (1) and plate assembly (2).
Illustration 2 g02155366
Disconnect hose assemblies (5) and harness assemblies (3) from pilot valve (4).
Remove pressure switches (6). Note: Mark the location of fittings (7) for installation purposes. The lower of the two fittings (7) has a filter.
Remove two fittings (7).
Illustration 3 g02155367
Reposition floor mat (11) from the travel pedals.
Remove covers (9).
Remove bolts (10) and lever assemblies (8).
Illustration 4 g02155368
Remove bolts (20) and pilot valve (4). Installation Procedure
Install pilot valve (4) in the reverse order of removal.
Tighten bolts (12) to a torque of 24 3 N m (212 27 lb in).
Tighten bolts (10) to a torque of 33 3 N m (24 2 lb ft).
Tighten fittings (7) to a torque of 24 3 N m (212 27 lb in).
Tighten pressure switches (6) to a torque of 23 2 N m (204 18 lb in).
Apply Tooling (A) to the threads of bolts (1).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.