parts catalog

EXHAUST PIPE 0000672 - Caterpillar

0000672 EXHAUST PIPE Caterpillar parts EXHAUST
Alternative (cross code) number:
Caterpillar 0000672 EXHAUST PIPE

Buy EXHAUST PIPE 0000672 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


444-05 code remained active when the wires were short circuited at the connector for the start relay. Proceed to Test Step 4.Test Step 4. Create a Short Circuit at the ECM
Turn the keyswitch to the OFF position.
Disconnect the J1/P1 ECM connectors.
Fabricate a jumper wire that is long enough to connect across the terminals at the ECM connector. Crimp connector sockets to each end of the jumper wire.
Remove terminal P1-10 (start relay) and terminal P1-67 (start relay return) from the ECM connector. Install the jumper wire into the terminal locations for the start relay.
Connect the J1/P1 ECM connectors.
Turn the keyswitch to the ON position.
Observe the "Active Diagnostic" screen on Cat ET. Wait at least 30 seconds so

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.