FASTENER GP 4646562 - Caterpillar

Table 3
Electronic Implement Control #2 Connector
Contact Descriptions (1)    
No.    Function    Type    
1     + Battery     System Power    
2     - Battery     System Ground    
3     Key Switch     Input    
7     Harness Code 1 (GND)     STG/STB    
8     Harness Code 2 (GND)     STG/STB    
9     Harness Code 3 OPEN     STG/STB    
14     + Battery     System Power    
15     - Battery     System Ground    
19     Harness Code 4 (GND)     STG/STB    
24     + Battery     System Power    
25     - Battery     System Ground    
40     Hook Motor (Two Speed ) Solenoid     Driver 4 HS    
41     Hook Motor (Two Speed ) Solenoid Ret     Driver 4 LS    
42     Dead Engine Counterweight Solenoid     Driver 5 HS    
43     Dead Engine Counterweight Solenoid Ret     Driver 5 LS    
48     Counterweight Extend Solenoid     Driver 6 HS    
49     Counterweight Extend Solenoid Ret     Driver 6 LS    
50     Counterweight Retract Solenoid     Driver 7 HS    
51     Counterweight Retract Solenoid Ret     Driver 7 LS    
57     Cat Data Link +     Input/Output    
64     CAN A Data Link +     Input/Output    
65     CAN A Data Link -     Input/Output    
70     Cat Data Link -     Input/Output    
( 1 ) Contacts that are not listed are not used.Note: The following table lists the connections for the PL61 Implement Control ECM.
Illustration 2 g01608833
Implement ECM pin orientation
Illustration 3 g01608896
Table 4
Implement Control ECM
Contact Descriptions (1)    
No.     Function    
1     + Battery    
2     - Battery    
3     Key Switch    
7     Harness Code 1 (Ground)    
8     Harness Code 2 (Ground)    
14     + Battery    
15     - Battery    
19     Harness Code (Ground)    
24     + Battery    
25     - Battery    
40     Hook Motor 2 Speed Solenoid    
41     Hook Motor 2 Speed Return    
42     Dead Eng Counterweight Solenoid    
43     Dead Eng Counterwieght Return    
48     Counterweight Extend Solenoid    
49     counterweight Extend Return    
50     Counterweight Retract Solenoid    
51     counterweight Retract Return    
57     Cat Data Link +    
64     CAN A Data Link +    
65     CAN A Data Link -    
70     Cat Data Link -    
( 1 ) Contacts that are not listed are not used.