parts catalog

FASTENER GP 4646575 - Caterpillar

4646575 FASTENER GP Caterpillar parts FASTENER
Alternative (cross code) number:
Caterpillar 4646575 FASTENER GP

Buy FASTENER GP 4646575 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    
B     1U-9200     Lever Puller Hoist     1    Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01328898
Use two people to install fuel tank (15) on the machine. The weight of fuel tank (15) is approximately 35 kg (76 lb). Connect hose assembly (16) .
Illustration 2 g01328892
Install bolts (14). Install bolts (13). Connect harness assembly (12) .
Illustration 3 g01328880
Use Tooling (A), Tooling (B), and a suitable lifting device to install fuel tank guard (11). The weight of fuel tank guard (11) is approximately 175 kg (385 lb).
Illustration 4 g01328872
Install bolts (10) and bolts (9) .
Illustration 5 g01328869
Install bolts (8) .
Illustration 6 g01328868
Install bolt (7). Connect harness assembly (6) .
Illustration 7 g01328850
Tighten nuts (5) .
Illustration 8 g01328812
Install baffle (4). Install plugs (3) .
Illustration 9 g01328803
Connect hose assembly (2) .
Illustration 10 g01327281
Tighten nuts (1) .
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)".

Parts fastener Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.