parts catalog

FENDER GP 2278062 - Caterpillar

2278062 FENDER GP Caterpillar parts 325C FENDER
Alternative (cross code) number:
Caterpillar 2278062 FENDER GP

Buy FENDER GP 2278062 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2278062:

EXCAVATOR  325C   Caterpillar
Number on catalog scheme:
  For full view, you need register


Which Generate This Code:The Electronic Control Module (ECM) detects the following conditions:If the engine is not running, the following conditions must be met.
The actual injection actuation pressure remains above 3 MPa (435 psi) for at least three seconds.
Cold mode is not active.If the engine is running, the following conditions must be met.
The actual injection actuation pressure and the desired injection actuation pressure differ by more than 2 MPa (290 psi) for at least ten seconds.
The change in injection actuation pressure was not consistent with the change in the current to the control valve.
Cold mode is not active.System Response:The ECM will log the diagnostic code. The status of "Injection Actuation Pressure" on Caterpillar Electronic Technician (ET) will revert to a default value.
The engine may experience low power.Test Step 1. Perform the following diagnostic procedure: Injection Actuation Pressure Sensor - TestResults:

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
325C LCR Mobile Hydraulic Power Unit BKW00001-UP (MACHINE) POWERED BY 3126B Engine

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.