AVSPARE.COM
parts catalog

FENDER AR-ROADING 4646686 - Caterpillar



4646686 FENDER AR-ROADING Caterpillar parts FENDER
Rating:
16
Alternative (cross code) number:
CA4646686
464-6686
4646686
Caterpillar 4646686 FENDER AR-ROADING

Buy FENDER AR-ROADING 4646686 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Lower the blade to the ground.
Illustration 1 g00884677
Attach a suitable lifting device to stabilizer link (1). The weight of stabilizer link (1) is approximately 120 kg (265 lb).
Remove bolts (2), cap (3), and the shims from each end of stabilizer link (1).
Start the machine.
Turn the machine to the left until stabilizer link (1) is disengaged from the trunnion and the front trunnion.
Stop the machine.
Remove stabilizer link (1). Installation Procedure
Illustration 2 g00884677
Use a suitable lifting device to position stabilizer link (1) between the blade and the front trunnions. The weight of stabilizer link (1) is approximately 120 kg (265 lb).
Start the machine.
Carefully turn the machine to the right until stabilizer link (1) is engaged with the trunnion and the front trunnion.
Stop the machine.
Install bolts (2) and cap (3) without the shims.
Tighten bolts (2) evenly on both sides of the cap.
Insert an equal amount of shims in the spaces between the cap and the stabilizer link, as needed.
Add one additional shim to each of the spaces. The specified clearance between the trunnion and the stabilizer link is 0.50 0.25 mm (0.020 0.010 inch).
Tighten bolts (2) to a torque of 620 80 N m (460 60 lb ft).
Repeat Steps 5 through 9 in order to install the opposite end of the stabilizer link. End By:
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
980L Wheel Loader D8Z00001-UP (MACHINE) POWERED BY C13 Engine


Parts fender Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.