AVSPARE.COM
parts catalog

FILM 3157435 - Caterpillar



3157435 FILM Caterpillar parts 328D LCR FILM
Rating:
60
Alternative (cross code) number:
CA3157435
315-7435
3157435
Caterpillar 3157435 FILM

Buy FILM 3157435 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3157435:

EXCAVATOR  328D LCR   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:

Machine Preparation
The following procedures must be completed before performing the calibration.
Set the pilot pressure to the specifications in Testing and Adjusting, "Relief Valve (Pilot) - Test and Adjust" for the machine.
Calibrate the attachment valves. Refer to Testing and Adjusting, "Solenoid Valve (Proportional Reducing) - Calibrate (Attachment Valves)" for the Tool Control System.
Position the machine on level ground and stop the engine.
Illustration 2 g03602396
Stop valves for high-pressure oil delivery to the work tool (typical example)
Close stop valves that are mounted on each side of the stick to prevent oil flow to the work tool during this procedure.
Disconnect the medium pressure lines for tool rotation and install the shipping plugs on the medium pressure lines. This action will prevent oil flow to the work tool for rotation during this procedure and allow for the valve to relief.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release" for the machine.
Illustration 3 g03615059
Medium pressure tap on front pump
(1) Pressure tap (delivery pressure for medium pressure)
Attach a 41,368 kPa (6,000 psi) pressure sensor to pressure tap (1).Temporary Setting of the Load Sense Valves
Illustration 4 g03649059
Medium pressure control valve
(2) Load sense adjustment (retract)
(3) Load sense adjustment (extend)
A temporary setting of the load sense valves is required before checking the line relief valve pressure of the medium pressure valve.
To adjust the load sense relief valve extend pressure setting, operate control input for EXTENSION of the attachment control valve to the FULL position and hold. Refer to Illustration 5 for the control inputs for tool rotation.
To adjust the load sense relief valve retract pressure setting, operate control input for RETRACTION of the attachment control valve to the FULL position and hold. Refer to Illustration 5 for the control inputs for tool rotation.
Check the pressure reading at pressure tap (1).
Return the control input to the NEUTRAL position.
Set the load sense valve pressure setting to the temporary specification. Refer to Table 2.
To adjust the load sense relief valves. Turn the adjustment screw until the pressure reading at the pressure tap is set to the temporary specification. Refer to Table 2.
Reset load sense valve pressure setting to the normal operating condition after the completion of the line relief test and adjust. Refer to Testing and Adjusting, "Medium Pressure: Relief Valve (Main) - Test and Adjust" for the Tool Control System.Note: Turn the adjustment screw clockwise to increase the pressure. Turn the adjustment screw counterclockwise to decrease the pressure.Note: Always make final pressure adjustment on pressure rise.Test Procedure
Start the engine.
Select a work tool for tool rotation.Refer to Testing and Adjusting, "Work Tool - Select" for the Tool Control System.
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Illustration 5 g03648848
Control Inputs for extension and retraction of the attachment valve for medium pressure
(LJ) Left-hand joystick
(RJ) Right-hand joystick
(C) Thumb wheel (Forward)

Caterpillar parts catalog:

Caterpillar parts catalog
328D LCR SUPPLEMENT FOR EXCAVATOR /LOADER FRONT, BLADE,/ MKR00001-UP (MACHINE)


Parts film Caterpillar catalog:

1347258 FILM-INFORMATION
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 1...
2248946 FILM-WARNING
12H, 216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 2384C, 242B, 242B3, 242D, 246C, 246D, 2470C, 247B, 247B3, 2484C, 252B, 252B3, 256C, 2570C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 26...
2218045 FILM-WARNING
1090, 1190, 1190T, 120K, 120K 2, 1290T, 12K, 1390, 140K, 140K 2, 160K, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 2864C, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 3...
1594700 FILM-WARNING
303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307B, 307C, 307D, 308C, 308D, 308E, 308E2 CR, 311C, 311D LRR, 311F LRR, 312B L, 31...
1205107 FILM-WARNING
303, 304, 305, 305.5, 305.5E, 306, 306E, 307B, 307C, 308C, 308D, 311B, 311C, 312B, 312B L, 312C, 312C L, 313B, 314C, 315B, 315B FM L, 315B L, 315C, 317B LN, 318B, 318C, 319C, 320B, 320B FM LL, 320B U,...
2508054 FILM-NOTICE
305.5, 305.5E, 306, 306E, 307C, 307D, 307E, 308C, 308D, 308E, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E ...
2289254 FILM-WARNING
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 301.6C, 302.5C, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C...
2684531 FILM-INSTRUCTION
307D, 308D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D2 L, 318E L, 319D L, 319D LN, 320C, 3...
2688872 FILM-WARNING
303.5C, 303.5D, 303.5E, 303C CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307D, 308D, 308E, 308E2 CR, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312E, 312E L, ...
2477436 FILM-IDENTIFICATION
311D LRR, 311F LRR, 312D, 312D L, 312D2, 313D, 314E CR, 314E LCR, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 G...
3106252 FILM-INSTRUCTION
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 32...
2477468 FILM-IDENTIFICATION
320D, 320D LRR, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 330D, 330D FM, 330D L, 330D LN, 330D MH, M325D L MH, M330D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.