FILM GP 3967779 - Caterpillar

Illustration 55 g01353988
Position brace (8). Install bolts (7) .
Illustration 56 g00546836
Connect harness assembly (6). Install harness assembly (6) into the clip.
Illustration 57 g00546835
Position harness assembly (3) through the grommet that is on fender assembly (5). Install a new cable strap (4) .
Illustration 58 g00546833
Connect harness assembly (3) to the headlamp.
Illustration 59 g00547282
Illustration 60 g01353987
Attach a suitable lifting device to ladder assembly (2). The weight of ladder assembly (2) is approximately 20 kg (44 lb). Position ladder assembly (2). Install bolts (1) .
Fill the hydraulic tank (steering). Refer to Operation and Maintenance Manual, "Steering System Oil - Change".
If equipped, open shutoff valves to the heater supply hoses.
If necessary, fill the radiator. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".Final Check
Reference Refer to the Service Manuals and the Operation and Maintenance Manual in order to correct any system problems.Reference Refer to the Service Manuals and the Operation and Maintenance Manual in order to locate and service the systems listed in the list below.After eight hours of continuous operation, replace the cleanout filter elements with standard filter elements for the systems that follow.
Parking brake filter
Transmission filter
Steering system filter
Torque converter charging oil filter
Before the engine is started, make sure that all the hydraulic systems are full. Also, ensure that all pump case drains are full.
Check that the following system pressures are set correctly.
Table 11
Item     Yes     No    
Pump            
Brake            
Steering Pressure            
Transmission            
Torque Converter            
Differential            
Check the machine lights.
Table 12
Lights     Yes     No    
Operational            
Cab and Dash            
Check the controls in the cab.
Table 13
Test     Yes     No    
Cab door opens            
Cab door closes            
Horn Functions            
Window Wipers function            
Seat Belt operates            
Fan Switch operates            
Air Conditioner operates            
EMS Test Light operates            
Hour Meter operates            
Hoist Implement operates            
Steering operates            
Steering Column operates            
Parking Brake Functions            
Check if all fluid levels are full.
Table 14
    Yes     No    
Fluids Full            
Correct any unusual noises or leaks.
Check if all lubrication lines are filled with grease.
Table 15
    Yes     No    
Full Lubrication lines            
Check the backup alarms function.
Table 16
    Yes     No    
Alarm Function