AVSPARE.COM
parts catalog

FILM GP 3967791 - Caterpillar



3967791 FILM GP Caterpillar parts 903C FILM
Rating:
85
Alternative (cross code) number:
CA3967791
396-7791
3967791
Caterpillar 3967791 FILM GP

Buy FILM GP 3967791 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3967791:

COMPACT WHEEL LOADER  903C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Park the machine on a level surface. Make sure that the transmission control is in the PARK position. The oil must be warm and the engine stopped.
Illustration 1 g02701277
Remove used oil filters (1) and discard the used oil filters. Note: The filters are accessed through the right front wheel well. Oil may be trapped in the filter housing bases. In order to avoid possible burns, remove the filters when the filters are cool enough to touch with your bare hand. Drain the oil into a suitable container.
Clean the filter housing base. Make sure that the former gaskets are removed.
Apply a thin film of clean engine oil to the seal of each new filter.
Install the filters by hand. Tighten each filter until the sealing surface contacts the base. Note the position of the index marks on each filter in relation to a fixed point on the filter base. Note: Caterpillar filters have rotation index marks that are spaced 90° or 1/4 of a turn away from each other. When you tighten the filters, use the rotation index marks as a guide.
Tighten each filter according to the instructions that are printed on the filter. Use the index marks as a guide. Note: You may need to use a Caterpillar strap wrench, or another suitable tool, in order to turn the filters to the amount that is required for final installation. Make sure that the installation tool does not damage the filters.
Start the engine and operate the engine at low idle for five minutes. Inspect the engine oil filters for oil leaks. Make any necessary repairs.
Check the oil level in the engine. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the proper procedure. If necessary, add oil.

Caterpillar SIS machinery equipment:

Caterpillar SIS
  • 903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine » 396-7791 FILM GP
  • 903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine » 396-7791 FILM GP

Caterpillar parts catalog:

Caterpillar parts catalog
903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine


Parts film Caterpillar catalog:

4353441 FILM GP
M318D, M318D MH, M322D
4353501 FILM GP
M318D, M318D MH, M322D
4353504 FILM GP
M318D, M318D MH, M322D, M322D MH
4166078 FILM GP
272D XHP, 299D XHP
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.