parts catalog

FILM-D6T XW 4645481 - Caterpillar

4645481 FILM-D6T XW Caterpillar parts FILM
Alternative (cross code) number:
Caterpillar 4645481 FILM-D6T XW

Buy FILM-D6T XW 4645481 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g02643318
Connections of the hystat controllerThis diagnostic code is associated with the Powertrain Speed Range Control Position Sensor. The FMI 03 means that the ECM has determined that the signal voltage of the PWM sensor is above normal.Possible causes of the diagnostic code are listed:
The sensor power supply is open.
Return circuit is open
The signal circuit is open or the sensor is disconnected.
The signal circuit is shorted to a +battery source.
The sensor has failed.
The ECM has failed. This is unlikely. System Response:A level 2 warning will be generated. The functionality is lost. The ECM cannot increase or the ECM cannot decrease the desired speed. Other sensors can aid in reducing machine speed such as the brake pedal.Note: Ensure that CID 2500 FMI 03 is active. This procedure can cause new diagnostic codes to be recorded. Ignore these created diagnostic codes. When the problem has been corrected, clear the created diagnostic codes.Test Step 1. CHECK THE SUPPLY VOLTAGE AT THE SENSOR
Turn the disconnect switch and the key start switch to the ON position.
The 12 contact connector for the sensor remains disconnected from

Parts film Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.