FILM GP 4645616 - Caterpillar

Table 1
Contact Description Of Implement/Valve Control ECM    
CONNECTOR C10    
J1 - 1     Keyswitch On    
J1 - 10     Cat Data Link +    
J1 - 11     +5V Sensor Supply    
J1 - 13     -Batt    
J1 - 20     Cat Data Link -    
J1 - 21     Sensor Return    
J1 - 26     Inc/Dec Trigger SW (NC)    
J1 - 27     Inc/Dec Trigger SW (NO)    
J1 - 31     + Batt    
J1 - 32     Auto Mode SW (NO)    
J1 - 33     Auto Mode SW (NC)    
J1 - 34     Man Mode SW (NO)    
J1 - 35     Man Mode SW (NC)    
J1 - 36     Hyd Pressure Sensor    
J1 - 45     Switch Return    
J1 - 55     Proportional Solenoid Return    
J1 - 65     Blade Tilt Right Sol    
J1 - 66     Blade Tilt Left Sol    
J1 - 67     Blade Raise Sol    
J1 - 68     Blade Lower Sol    
CONNECTOR C9    
J2 - 2     Counter Balance Sol    
J2 - 3     Boost Sol    
J2 - 4     On/Off Sol Return    
J2 - 67     CAN DataLink A+    
J2 - 68     CAN DataLink A -    
Table 2
Contact Description Of Power Supply Module    
Connector A    
A     Blade Control B+ 1    
B     Ground 1    
C     Blade Control B+ 2    
D     Ground 2    
G     Blade Control B+ 3    
H     Ground 3    
Connector B    
A     Switched Power 1    
B     Switched Power 1 Return    
C     Switched Power 2    
D     Switched Power 2 Return    
E     Awake    
F     Awake Ground    
G     Switched Power 3    
H     Switched Power 3 Return    
Table 3
Contact Description Of Display    
Connector C2    
A     Switched Power 1    
C     CAN High